Music engineering is all about mixing music to achieve the highest sound quality out of a recording. It is never enough for a band to simply go to the recording studio and record the song. Once the recording phase is finished, the recordings will then be handed over to a music engineer, and he will put his own magical touch to the track. The band members themselves can also proceed with a bit of music engineering. Many music producers today have a music engineer in their team.
If you are planning to try music engineering on your own, there are several tips you have to keep in mind to ensure that you will reach the best possible final mix down.
First of all, it is important to have several acoustic treatments inside your own studio. These can include the side wall absorbers, bass traps, and ceiling clouds. These and more are going to help a lot when it comes to neutralizing your room acoustics.
It is important that your speakers are placed as far away from the corners as much as possible. You have to do this in order to get rid of the problem of creating an artificial increase in the bass volumes. It is extremely essential when your speakers have bass reflex ports found at the back.
The speakers should also be in isolate. You can do it through the use of an acoustic tile in order to help lessen vibrations transferring to your stands, desk, and others. When you do this, you can dramatically improve clarity.
Start working on your mix, then make sure that you listen to it once again the following morning. You must never do the final mixes at night when you tend to be more tired and less alert to the point that you cannot hear any potential flaws.
Don’t forget the backups. Make sure that you always have some kind of external backup for your music such as an external hard drive or even a USB stick. It is not a secret that computers are often unpredictable, and in the event of a crash in the hard drive, a backup means that your work will remain safe.
Make sure that you listen to the mix on different speaker systems. Look for flaws that you cannot find on your primary speaker systems, and from there, do the necessary tweaking. Always double check to guarantee that the mix will sound good on every speaker system as much as possible.
Check the mix in mono. When your track is played live, there is a chance that the speaker system in the venue in is mono. You also have to ensure that the mix will sound good even in mono.
These are just a few basic tips you can follow for successful music engineering. Even the smallest things such as the position of the speaker can make a big difference on the sound of your mix. So, remember these simple tips to create the highest quality mixes.